Flat-Rolled Steel Experts
Slit Coil, Leveled Sheets & Precision Blanks
Monarch Steel was founded in 1934 and is one of the country’s largest distributors of flat-rolled steel products. We primarily serve the Midwest and Southeast United States from 2 steel service centers strategically placed in Cleveland, Ohio and Decatur, Alabama.
Steel Materials & Products
We source American-made steel from the 2 largest domestic steel producers in the country to meet a wide variety of grades and ASTM/SAE specifications. We offer slit coils, leveled sheets and precision blanks in these steel materials:
- Hot Rolled Steel
- Hot Rolled Pickled & Oiled Steel (HRPO)
- Cold Rolled Steel
- Galvanized Steel
- Galvannealed Steel
- Aluminized Steel
Slit Coils
Leveled Sheets
Precision Blanks
Steel Service Center Locations & Capabilities
Decatur, Alabama
1425 Red Hat Road
Decatur, AL 35601
175,000 sq. ft. metals service center primarily supporting customers in the South and Southeast flat-rolled steel industry.
Master Coil Specifications
| Light Gauge | Heavy Gauge | |
| Gauge Range | .015″ – .125″ | .050″ – .375″ |
| Width Entry | 60″ | 76″ |
| Width Exit | 60″ | 76″ |
| I.D. Entry | 20″ – 24″ | 20″ – 32″ |
| I.D. Exit | 20″ – 24″ | 20″ – 24″ |
| O.D. Entry | 72″ | 76″ |
| O.D. Exit | 72″ | 76″ |
| Weight Entry | 60,000 lb. | 80,000 lb. |
| Weight Exit | 60,000 lb. | 80,000 lb. |
Coil Slitting Capabilities
- Our tooling allows for up to 25 mults per coil
- Minimum slit widths
- 1.75″ for light gauges
- 2.75″ for heavy gauges
- Slit width tolerances
- +/- .005″ for gauges up to .175″
- +/- .010″ for gauges .175″ and up
Cut-to-Length Capabilities
- Applies to both leveled sheets and precision blanks
- Width ranges from 12″ to 60″
- Min length for all gauges is 12″
- Max length varies by gauge:
- 20′ for gauges .048″ to .070″
- 60′ for gauges .070″ to .530″
- Length tolerance is +/- .064″
Cleveland, Ohio
4650 Johnston Parkway
Cleveland, OH 44128
118,000 sq. ft. metals service center primarily supporting customers in the Midwest flat-rolled steel industry.
Master Coil Specifications
| Light Gauge | Heavy Gauge | |
| Gauge Range | .025″ – .105″ | .070″ – .250″ |
| Width Entry | 62″ | 62.5″ |
| Width Exit | 60″ | 60″ |
| I.D. Entry | 20″ – 30″ | 16″ – 32″ |
| I.D. Exit | 20″ – 24″ | 20″ – 24″ |
| O.D. Entry | 72″ | 72″ |
| O.D. Exit | 72″ | 72″ |
| Weight Entry | 44,000 lb. | 54,000 lb. |
| Weight Exit | 41,000 lb. | 54,000 lb. |
Coil Slitting Capabilities
- Our tooling allows for up to 18 mults per coil
- Minimum slit width is 1.5″
- Slit width tolerances
- +/- .010″ on narrow mults up to 23″
- +/- .0625″ on wide mults 24″ and over
Cut-to-Length Capabilities
Please see our cut-to-length capabilities listed below under Premium Metals, our 2nd location in Cleveland, OH.
Contact Us
We’re the preferred distributor of flat-rolled steel products for hundreds of steel users. Whether your needs center on material specifications, inventory management, cost effectiveness, technical support, or a combination thereof, we are confident we can help. Give us a try – you’ll be glad that you did.