Steel Slit Coils, Sheets & Blanks
Monarch Steel & Premium Metals operate under the umbrella of American Consolidated Industries to produce slit coil, leveled sheets and precision blanks, fulfilling steel service needs throughout the Midwest & Southeast United States.
We have strong relationships & contracts with the 2 largest domestic steel producers in the country, enabling us to provide high-quality steel products at a competitive price. Our commitment to customer service and ability to accept small quantity orders (LTL) also sets us apart from the competition.
Big Enough to Matter,
Small Enough to Care
We’re a mid-sized steel company with 3 service centers and 2 tubing facilities. Although we operate like most corporations, ACI is a family-owned business and that shows through in our people-centric culture.
We continue to mature in capability and capacity, but a few things will always remain true to American Consolidated Industries, Inc. – safety, quality, customer service, and most importantly, our people.
Steel Materials & Products
We produce steel to meet a wide variety of grades and ASTM/SAE specifications. We can supply slit coils, leveled sheets and precision blanks in these steel materials:
- Hot Rolled Steel
- Hot Rolled Pickled & Oiled Steel (HRPO)
- Cold Rolled Steel
- Galvanized Steel
- Galvannealed Steel
- Aluminized Steel
Slit Coils
Leveled Sheets
Precision Blanks
Steel Service Center Locations & Capabilities
Monarch Steel Company – Decatur, Alabama
1425 Red Hat Road
Decatur, AL 35601
Master Coil Specifications
| Light Gauge | Heavy Gauge | |
| Gauge Range | .015″ – .125″ | .050″ – .375″ |
| Width Entry | 60″ | 76″ |
| Width Exit | 60″ | 76″ |
| I.D. Entry | 20″ – 24″ | 20″ – 32″ |
| I.D. Exit | 20″ – 24″ | 20″ – 24″ |
| O.D. Entry | 72″ | 76″ |
| O.D. Exit | 72″ | 76″ |
| Weight Entry | 60,000 lb. | 80,000 lb. |
| Weight Exit | 60,000 lb. | 80,000 lb. |
Coil Slitting Capabilities
- Our tooling allows for up to 25 mults per coil
- Minimum slit widths
- 1.75″ for light gauges
- 2.75″ for heavy gauges
- Slit width tolerances
- +/- .005″ for gauges up to .175″
- +/- .010″ for gauges .175″ and up
Cut-to-Length Capabilities
- Applies to both leveled sheets and precision blanks
- Width ranges from 12″ to 60″
- Min length for all gauges is 12″
- Max length varies by gauge:
- 20′ for gauges .048″ to .070″
- 60′ for gauges .070″ to .530″
- Length tolerance is +/- .064″
Monarch Steel Company – Cleveland, Ohio
4650 Johnston Parkway
Cleveland, OH 44128
Master Coil Specifications
| Light Gauge | Heavy Gauge | |
| Gauge Range | .025″ – .105″ | .070″ – .250″ |
| Width Entry | 62″ | 62.5″ |
| Width Exit | 60″ | 60″ |
| I.D. Entry | 20″ – 30″ | 16″ – 32″ |
| I.D. Exit | 20″ – 24″ | 20″ – 24″ |
| O.D. Entry | 72″ | 72″ |
| O.D. Exit | 72″ | 72″ |
| Weight Entry | 44,000 lb. | 54,000 lb. |
| Weight Exit | 41,000 lb. | 54,000 lb. |
Coil Slitting Capabilities
- Our tooling allows for up to 18 mults per coil
- Minimum slit width is 1.5″
- Slit width tolerances
- +/- .010″ on narrow mults up to 23″
- +/- .0625″ on wide mults 24″ and over
Cut-to-Length Capabilities
Please see our cut-to-length capabilities listed below under Premium Metals, our 2nd location in Cleveland, OH.
Premium Metals – Cleveland, Ohio
4389 Martin Ave.
Cleveland, OH 44127
Master Coil Specifications
| Light Gauge | |
| Gauge Range | .020″ – .187″ |
| Width Entry | 17.5″ – 54″ |
| Width Exit | 17″ – 51.625″ |
| I.D. Entry | 16″ – 24″ |
| I.D. Exit | 16″ – 20″ |
| O.D. Entry | 66″ – 75″ |
| O.D. Exit | 48.5″ – 70″ |
| Weight Entry | 37,500 lb. |
| Weight Exit | 20,000 lb. |
Coil Slitting Capabilities
- Our tooling allows for up to 24 mults per coil
- Minimum slit width is 1.5″
- Slit width tolerance is +/- .005″
Cut-to-Length Capabilities
- Applies to both leveled sheets and precision blanks
- Width ranges from 0.5″ to 60″
- Length ranges from 12″ to 180″
- Length tolerance is +/- .5″
Contact Us
Ready to discuss your needs? Please submit our contact form or call (216) 332-7274.
